Display icons
Display of the time.
14:45
Display of the date.
06/11
The phone book is open.
CID
The calls list is open.
The entry in the calls list is new.
NEW
Indicates a repeat call.
Position number in the call list.
TOTAL:XX There are XX entries in the call list.
NEW:XX
There are XX new entries in the call list.
First use
After having connected the phone to the telephone line for the first time,
you will be asked for some settings.
If this settings procedure is aborted, e. g. by lifting the handset, you
can do these settings later at any time (see page 17).
In the display ENGLISH is flashing (setting on delivery).
Use
or
to select the desired language.
Press
C
to confirm the setting.
The display shows LCD CONTRAST.
Use
or
to change the contrast (1 2 3 4).
C
Press
to confirm the setting.
The display shows SET TIME/DATE with the "hours" flashing.
Set the hours using
or
and press
Set the minutes using
or
Set the day using
or
and press
Set the month using
or
and press
The display shows SETPAUSETIME flashing.
Use
or
to select the pause time of 1...4 seconds
C
.
C
and press
.
C
.
C
.
(if necessary)
10
You will only have to do this when operating your phone on a PABX.
For more information please refer to page 18. Press
The display shows FLASHTIME flashing.
Use
or
to select the flash time (if necessary). In most situations
100 ms (setting on delivery) should be selected. You won't have to change
anything.
Simply press
Your telephone is ready to use and shows the idle display
You can change this settings later at any time. For more information
please refer to page 17.
Making and receiving calls
Dialling a telephone number
To start a call you have the following options:
lift the handset and enter the phone number.
-
enter the phone number and lift the handset.
-
or alternatively
enter the phone number and press
-
Handsfree mode will be activated and the phone number will be
-
dialled in handsfree mode.
•
During a call you can see the call time on the display.
Ending a call
For ending a call you can:
replace the handset. or alternatively
-
-
press
(the red LED within the handsfree button is on).
Taking a call
Lift the handset or press
Activating/deactivating handsfree mode
During a call you are making using the handset.
You can switch to handsfree mode to switch on the loudspeaker by
.
Press
and then replace the handset.
C
.
.
if the call was made in handsfree mode
.
11
C
.