Boost The Handset Earpiece Volume; Setting The Handset Receiver Volume; Setting The Handset Receiver Equalizer; Setting The Handsfree Volume - Amplicomms BigTel 48 Plus User Manual

If you want to continue the call using the handset simply lift the handset.
Please note:
During handsfree mode your speech is transmitted via the
-
microphone on the base. Speak at a distance of not more than 0.5
meters facing the front of the unit.
High background noise levels can prevent satifactory operation.
-

Boost the handset earpiece volume

You can boost the handset earpiece volume up to +40 dB.
Press . The "On" LED is on.
To switch off the Boost function press
the handset on the cradle the boost function will automatically turn off.
Caution: This telephone is capable of producing very high volume levels
when the amplifier is switched on and the volume control is set to
maximum. Extreme caution should be taken if the handset is to be shared
between users with normal hearing and those with hearing impairment.

Setting the handset receiver volume

You can adjust the handset receiver volume using the control knob(19) /
(refer to "Overview of Your Phone").

Setting the handset receiver equalizer

You can adjust the handset receiver tone using the equalizer control (21)
while the Boost function is on (refer to "Overview of Your Phone").

Setting the handsfree volume

You can adjust the handsfree volume using the slide control (22) (refer to
"Overview of Your Phone").

Dialling a telephone number using the redial function

Your telephone stores the last phone number dialled.
• Lift the handset or press
or alternatively.
• Press and then lift the handset or press

Calling back missed calls

The telephone stores the numbers of incoming calls in a calls list.
For further information please refer to the chapter „Calls list" on page 16.
again. Note, when replacing
and then press .
.
12
• Lift the handset or press
and and press
• select the desired entry using
press .

Dialling a telephone number from the phone book

For how to create and store phonebook entries please refer to the chapter
"Phone book" on page 14.
• Lift the handset or press
• Press , select the desired entry using
.
or
• Press , select the desired entry using
handset or press .

Dialling a telephone number using quick dialling

For how to store quick dial numbers please refer to the chapter "Quick
dial" on page 15.
• Lift the handset or press
• Press and then the memory location number (0 ... 9).
or
• Press and then the memory location number (0 ... 9).
• Lift the handset or press

One-touch dialling / Emergency call

The one-touch dialling / emergency call buttons can be used to dial an
emergency services exchange or persons for assistance. For how to store
one-touch / emergency numbers please refer to the chapter "One-touch
dialling / emergency call" on page 16.
• Lift the handset or press
• Press the one-touch memory button
or
• Press the one-touch memory button
• Lift the handset or press
Note: The telephone numbers assigned to the one-touch dialling buttons
can not be deleted. When storing new numbers, the existing entries are
overwritten.
, then select the desired entry using
. or alternatively
and , then lift the handset or
.
and and press
and and lift the
.
.
.
or .
or .
.
13