Phone Settings; Ringer Volume; Flash Time (Recall) - Amplicomms powertel 46 User Manual

Phone settings

Ringer volume

You can set the ringtone volume using the slide switch
Loud).

Flash time (Recall)

You can set the length of the flash signal using the slide switch on
the rear side of the telephone (300 ms – 100 ms).
The flash function is activated by pressing the
Flash time - In most situations the flash time of 100 ms should be
selected. In some cases, e. g. when connecting the
phone to a PABX, it may be necessary to switch to 300
ms. For further information please refer to the user
guide of the PABX.
Helpline UK 0844 800 6503
(See page 32 for costs and hours of operation)
P
HONE SETTINGS
(Off - Quiet -
button, see also page 28.
27