Taking A Call; Activating/Deactivating Handsfree Mode; Boost The Handset Earpiece Volume; Setting The Handset Receiver Volume - Amplicomms BigTel 50 Alarm Plus User Manual

- press if the call was made in handsfree mode (the red LED
within the handsfree button is on.

Taking a call

Lift the handset or press .

Activating/deactivating handsfree mode

During a call you are making using the handset you can switch to
handsfree mode to switch on the loudspeaker (power supply/batteries
necessary).
Press and then replace the handset.
If you want to continue the call using the handset simply lift the handset.
Please note:
- During handsfree mode your speech is transmitted via the micro-
phone on the base. Speak at a distance of not more than 0.5 meters
facing the front of the unit.
- High background noise levels can prevent satifactory operation.

Boost the handset earpiece volume

You can boost the handset earpiece volume to +40 dB (power supply/
batteries necessary). Press . The "On" LED is on.
Caution: This telephone is capable of producing very high volume
levels when the amplifier is switched on and the volume control is
set to maximum.
Extreme caution should be taken if the handset is to be shared
between users with normal hearing and those with hearing impair-
ment.

Setting the handset receiver volume

You can adjust the handset receiver volume using the control (19) /
(refer to inlay page).
38