Ending A Call; Taking A Call; Activating/Deactivating Handsfree Mode; Boost The Handset Earpiece Volume - Amplicomms BigTel 48 Plus User Manual

Ending a call

For ending a call you can:
replace the handset. or alternatively
-
press
-
(the red LED within the handsfree button is on).

Taking a call

Lift the handset or press

Activating/deactivating handsfree mode

During a call you are making using the handset.
You can switch to handsfree mode to switch on the loudspeaker by
Press and then replace the handset.
If you want to continue the call using the handset simply lift the handset.
Please note:
During handsfree mode your speech is transmitted via the
-
microphone on the base. Speak at a distance of not more than 0.5
meters facing the front of the unit.
High background noise levels can prevent satifactory operation.
-

Boost the handset earpiece volume

You can boost the handset earpiece volume up to +40 dB.
Press . The "On" LED
To switch off the Boost ON function press
Note: When replacing the handset on the cradle the boost function will
automatically turn off.
Caution: This telephone is capable of producing very high volume levels
when the amplifier is switched on and the volume control is set to
maximum. Extreme caution should be taken if the handset is to be shared
between users with normal hearing and those with hearing impairment.

Setting the handset receiver volume

You can adjust the handset receiver volume using the control knob(19) /
(refer to "Overview of Your Phone").

Setting the handset receiver equalizer

You can adjust the handset receiver tone using the equalizer control (21)
while the Boost function is on (refer to "Overview of Your Phone").
if the call was made in handsfree mode
.
is on.
again.
9