Led Indicator - Eiki EIP-1 Owner's Instruction Manual

LED Indicator

When the projector is turned on, the LED indicator flashes. Press the Power
key to display the mage. At this time, the LED indicator lights up
consistently.
If the LED indicator flashes quickly, the projector is probably in an
abnormal condition. Possible reasons include:
a. If the fan is in an abnormal condition, the message "Fan lock error
occurred, Projector going shutdown!" appears on the screen.
b. If the temperature becomes abnormal, the message "Thermal error
occurred, Projector going shutdown!" appears on the screen.
LED indicator flashes quickly when you start the shutdown process.
Power
Please refer to page 8 "Turning on/off the projector".
Auto/Enter
This key works as Auto key in normal condition.
This key works as an Enter key in the menu.
Menu
Press this key to open the menu. Press again to close the menu.
If you do not choose any items after opening the menu, then the menu will
automatically close after 20 seconds.
↑↓Keys
You can use the up and down keys to select menu options.
Usually the down key works as a Source key. You can also press this key to
select Analog RGB, Analog Y Pb Pr, Digital RGB, Composite Video,
S-Video and Component Video signals in sequence.
← → Keys
On the menu, press the Enter key and then the right key to increase the
setup value; or the left key to reduce the setup value.
13