Eiki EIP-1 Owner's Instruction Manual page 8

2) For playing video with audio effects
Connecting with the Video Enhanced Adaptor; and choose terminals below to
connect.
1. Power cord
2. VGA signal in port
3. USB mouse control
4. S-Video signal in port
5.6 Composite Video signal in port
7.8 PC Audio In/Out port
Notes Connecting to a Computer
1. Please make sure that both projector and computer are
shutdown.
2. Plug USB cable into computer.
3. Plug one end of the VGA cable into the projector.;
4. Plug the other end into the computer.
5. Plug the power cord into the power connector on the side
of projector; and plug into the socket.
6. Turn on projector first, then computer.
7