Table of Contents
Advertisement
Q.: Image becomes blurred
Adjust the focus ring of the projector.
Make sure that distance between the screen and projector is adequate
(1.45~10m)
Q.: The colors projected by your projector look different from the colors of
your computer or VCR.
This is not a problem. You can adjust the brightness, color or contrast on the
menu to change colors.
Q.: When the projector is connected to a DVD player, playing a film with the
ratio 16:9, the image is reshaped.
Adjust the aspect ratio of the projector to 4:3.
Q.: Up-side-down image
Open the menu; and then select Management to adjust the projection
direction.
Q.: Lamp burned out or cracked.
The lamp burns out when its life is over. It might crack and sometimes the
broken pieces lead to the result that a blower is blocked and stops turning. In
such a case, please contact the licensed local distributor to purchase the
replacement. To change the lamp, please follow the steps stated in "Replacing
the lamp".
27
Advertisement
Table of Contents
