Language - Eiki EIP-1 Owner's Instruction Manual

To recount hours after replacing
Lamp Reset
the lamp.
For end users to fix the brightness
Auto Adjust
and contrast settings. This function
only works in the VGA mode.
To return to the factory default.
Reset All
To select RGB, Composite,
Source Type
Component, HDTV(**),S-Video,
signals or Auto Scan.
* Press "Auto" key to return to previous setup.
** HDTV: supporting EDTV 480p and HDTV 720p & 1080i.

5.7 Language

Please use up and down keys to choose the language you likened and press right
key to select. Press the Menu key or Esc key on the remote controller to return to
main menu.
Press the right key. The
message "Press Enter key
to confirm lamp reset
operation!" appears. Please
check if the user has
replaced the new lamp. If
yes, press Enter key. If not,
press Menu key or Esc key
on the remote controller to
quit.
Choose Yes. The values of
brightness and contrast vary
each time when pressing
Auto key.
Choose No. The values of
brightness and contrast
remain the same.
Press the right key.
Press
selection.
24
key for