Eiki EIP-1 Owner's Instruction Manual page 16

Mode
Menu
Source
Blank
Auto
Pg.Up
Pg.Dn
↑↓←→
* Press Auto key to return to previous setup.
Press this key and green LED indicator turns on. Then
the remote controller can be used as a mouse.
Be sure to connect USB mouse cable to the
computer and projector before using the remote
controller as a mouse.
Please refer to page 13 "Menu" of "Control panel".
Select Analog RGB, Analog Y Pb Pr, Digital RGB,
Composite Video, S-Video and Component Video
signals in sequence.
Convert the image into blank and fully blue. Press
again to restore.
Press this key to adjust the phase and frequency
automatically.
On the remote control mode, press this key to zoom in
the image (*).
When mouse is in use, press this key to turn to
previous page.
On the remote control mode, press this key to zoom
out the image (*).
When mouse is in use, press this key to turn to next
page.
Press this key and then left/right keys for keystone.
Press key to reduce the length of lower screen.
Press to reduce the length of upper screen.
(*)
Do not activate when displaying text or spreadsheets to
eliminate text distortion
In the remote control mode, the function of these keys
is the same as the up/down/left/right keys on the panel
(*).
In the remote-control mouse mode, the function of
these keys is the same as the up/down/left/right key o
the
mouse.
15
f