Panametrics DigitalFlow XMT868i Programming Manual page 106

Appendix C. Programming the XMT868i Using PanaView™
C.5.2.1 Programming the Energy Option
1. Double-click on the desired Power Units (listed in Table 29).
kBTU/hr = Thousands of BTUs/hour
MMBTU/hr = Mega BTUs/hour
kWATT = Kilowatt
TONS = Tons (2000 LB)
2. Double-click on the desired number of Power Decimal Digits.
3. Double-click on the desired Total Energy Units (shown in Table 30).
4. Double-click on the desired number of Energy Decimal Digits.
5. Double-click to choose a Heating or Cooling System.
6. The final prompt asks whether you want to conduct Flow Measurement at the point of Return (where the liquid
exits) or of Supply (where the liquid enters). Double-click on the appropriate choice.
You have completed entering data in the System option. PanaView returns to the Channel PROGRAM menu shown in
Figure 42 on page 26. Proceed to the next page to enter Pipe parameters.
32
Table 29: Available Power Units
English
Table 30: Available Total Energy Units
English
kBTU = Thousands of BTUs
MMBTU = Millions of BTUs
kWATT-Hr = Kilowatt-hour
TONS = Tons (2000 LB)
Metric
kCALs = Kilocalories/second
kCALm = Kilocalories/minute
kCALh = Kilocalories/hour
kCALd = Kilocalories/day
MCals = Megacalories/second
MCALm = Megacalories/minute
MCALh = Megacalories/hour
MCALd = Megacalories/day
kW = Kilowatt
MW = Megawatt
Metric
kCalories = Kilocalories
MCalories = Megacalories
kWATT-Hr = Kilowatt-hour
MWATT-Hr = Megawatt-hour
DigitalFlow™ XMT868i Programming Manual