Summing - KERN FCD 10K-3 User Manual

8.9 Summing

The function enables to add individual weighing values to the total memory by
pressing the button.
The function is available starting from weight values above 20 d.
Summing the weighed material:
 Whenever required, place an empty container on the scale and tare it.
 Place the first weighed material. Wait until the stabilization indicator [ ] is
displayed and then press M. The weight value will be saved. The ∑ symbol will
be displayed.
 Remove the weighed material. The subsequent weighed material can be added
only when the indication ≤ zero.
 Place the second weighed material. Wait until the stabilization indicator [ ] is
displayed and then press M. The weight value will be added to the total memory.
The total will be displayed alternately with the currently placed weight for ca. 5 s.
 Whenever required, add the subsequent weighed material as described above.
Load should be removed from the scale between consecutive weighing
procedures.
 This process may be repeated 99 times until you reach the scale weighing range.
Displaying the "total" value:
 When zero is displayed, press M. The total weight will be displayed for ca. 5 s.
Deleting the total memory:
 When zero is displayed, press the M button. When the total weight is displayed,
press UNIT.
TFCD_A-BA-e-2110 25