Rechargeable Battery Operation - KERN FCD 10K-3 User Manual

7.5 Rechargeable battery operation

 The rechargeable battery and the charger are compatible.
PLEASE
NOTE!
 Do not use the scale when charging.
 Always replace the battery with the one of the same type or
 The battery is not protected against all the environmental
 Protect the battery from fire and heat.
 Do not allow the battery to have any contact with liquids,
 Do not expose the battery to high pressure or microwave
 Do not modify any batteries, charger and do not tamper them.
 Do not use any faulty, damaged or deformed battery.
 Do not connect the electrical contacts of the battery and do
 The electrolyte may be released by the damaged battery. Any
 When you place or replace batteries, always pay attention to
 When the power supply is connected, the battery operation
 If you detect any odor emitted by the battery, its heating,
14
Always use the power supply delivered with the scale.
of the type recommended by the manufacturer.
impacts. Exposing the battery to specific environmental
conditions may result in its fire or explosion. It may result in
serious injuries or material losses.
chemicals or salts.
radiation.
not use any metal items to short circuit them.
contact of the electrolyte with the skin or eyes may irritate
them.
the correct polarity (see the information in the battery
compartment).
mode is switched off. Always remove the battery for weighing
in the power supply mode longer than 48 h! (Overheating
danger).
discoloration or deformation, disconnect it immediately from
the power supply and, whenever possible, from the scale.
TFCD_A-BA-e-2110