Setup Menu - KERN FCD 10K-3 User Manual

9 Setup menu

The setup menu enables to adapt the scale settings / scale behavior to your
requirements (e.g. ambient conditions, special weighing processes).
Menu navigation:
Displaying the menu
Selecting the menu item
Setting selection
Changing settings
Setting confirmation /
Menu leaving
Overview:
Main menu Submenu
block item
BuAd96 BuAd96*
Transmission
BuAd48
speed
rS oFF
RS CO
rS Co
Data
transmission
rS SCo*
rS St
rS Co
bl-AY*
bl-AY
Display
bl-on
backlight
bl-oFF
FiLt-1* ∼
FiLt-1
FiLt-5
Filter
26
 In the weighing mode, press and hold the PRINT
for 3 s.
 Individual menu items can be selected
consecutively, pressing TARE.
 Confirm the selection of the menu item by
pressing the ZERO button. The current setting will
be displayed.
 The TARE button enables to switch between the
available settings.
 Press
, the scale will switch to the weighing
mode again.
Available
settings / explanation
Transmission speed 9600
Transmission speed 4800
Data transmission off
Continuous data transmission of stable/unstable
weighing values
Continuous data transmission of stable weighing
values
Data transmission for an unstable weighing value
Data transmission after PRINT is pressed
The backlight is switched on automatically when load
is changed or when the device is operated
Display backlight always on
Display backlight always off
Adaptation to the ambient conditions,
you can select from FiLt-1 ∼ FiLt-5.
The higher the filter degree, the faster the response
time/but also the higher the sensitivity.
TFCD_A-BA-e-2110