F1] : Battery Voltage Adjustment - FujiFilm FinePix F30 Service Manual

FinePix F30 Service Manual

4-13. [F1] : Battery Voltage Adjustment

<Setup for Flash Adjustment>
(1) When adjusting the battery voltage, supply power (3.70V) to the camera from the [FxF30 Battery jig] before setting the jig
mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
FinePix F30
<Step 1>
Select [F1] Battery Voltage Adjustment on the [Adjustment Items Select] screen.
—> The [Battery Voltage Adjustment Preparation] screen appears.
USB cable or
Multi cable (AV/USB) for F30
FxF30 Battery jig
4. Adjustments
PC for adjustment and checks
Digital voltmeter
Regurated
Power supply
75