End Voltage Adjustment - FujiFilm FinePix S1500 Service Manual

Confidential: FUJIFILM Service Center Use Only
4. Adjustments
FinePix S1500 Service Manual
4-13.

End Voltage Adjustment

<Settings used for End Voltage Adjustment>
FinePix S1500
DC COUPLER CP-04
Regurated
Digital voltmeter Power supply
POWER CABLE JIG
<Step 1>
Set the digital voltmeter to voltage measurement mode and then connect it to the Power Cable Jig clip.
After checking the digital voltmeter and setting the regulated power supply to 5.0 V, plug the DC COUPLER into the camera.
<Step 2>
Insert the adjustment SD card into the camera, set the Mode dial to " q " and then turn the camera on.
<Step 3>
Adjust the voltage from the regulated power supply until 4.09V±0.02V is displayed on the digital voltmeter.
4-30