Table of Contents
Advertisement
FinePix30i(U/E/EG) SERVICE MANUAL
4-4-3.Battery adjustment
(1) Press the [F1] key on the PC keyboard to select [F1] Battery adjustment from the Adjustment item menu.
The input voltage setup instructions screen is displayed. Adjust the voltage in accordance with instructions.
Press the Enter key on the PC keyboard when preparations are complete (Fig.17).
The Pre-end voltage is set when the Enter key on the PC keyboard is pressed. Set the input voltage for End voltage
setup and press the Enter key on the PC keyboard. Set the input voltage for movie End voltage setup and press the
Enter key on the PC keyboard.
Finally, return to the original input voltage and press the Enter key on the PC keyboard.
(2) Battery adjustment is complete when the Enter key on the PC keyboard is pressed. An instruction screen for return to
the menu screen is displayed. Press the Enter key on the PC keyboard to return to the menu (Fig.18).
4-4-4.LCD adjustment
(1) Press the [F3] key on the PC keyboard to select [F3] LCD adjustment from the Adjustment item menu.
The LCD brightness adjustment screen is displayed. Follow the instructions on the screen (Fig.19).
The brightness adjustment image in Item 1 is shown in Fig.20. Press the right key once to select this image.
When adjusting brightness in Item 2, use the Up and Down arrow keys to adjust so that all gradations on the gray
bars at left and right are displayed.
Press the Enter key on the PC keyboard when adjustment is complete.
(2) LCD brightness adjustment is complete when the Enter key on the PC keyboard is pressed. An instruction screen for
return to the menu screen is displayed. Press the Enter key on the PC keyboard to return to the menu (Fig.21).
Fig.17
Fig.19
Fig.21
4.Adjustment
Fig.18
Gray bars
Fig.20
33
Advertisement
Table of Contents
