Inspection And Factory Settings - FujiFilm FinePix F30 Service Manual

5. Inspection
5-3.

Inspection and Factory Settings

Sequemnce Item
1 External visual
check
2 Power switch Auto mode
check
3 Zoom operation Auto mode
check
4 Shock noise check Auto mode
in Auto mode
5 Resolution check Auto mode
Focusing check
90
Mode Preparations for adjustment
(measurement points, subject, other)
(1) Observe the camera.
(1) Connect the AC-5V to the
camera.
(2) Insert a card and close the
card cover.
(3) Select the mode dial
setting.
(4) Turn the camera on.
(5) If a message prompting
the user to set the date
appears, press the button
specified on the right.
(6) Check the LCD screen
display status.
(7) Check for blemishes in the
CCD live image.
(1) Zoom drive noise.
(2) Zoom operation (T <-> W).
(1) Apply a shock to the
camera using the shock
jig.
(1) Use a macro resolution
chart as the subject.
(2) Set the camera to Macro
mode.
(3) Set the camera up so that
the chart fills the screen
from corner to corner.
(4) Set the Flash On mode to
red-eye mode.
FinePix F30 Service Manual
Method of adjustment
(VRs, waveforms, required values)
(1) Check for damage to the
outer casing.
(2) Check for problems with
the clicking or sliding
movement of switches.
(3) Check for dust or fogging
in the LCD.
(2) Card for recording
checking.
(3) Mode: AUTO
(4) Check that the camera
beeps.
(5) < BACK>
(6) Check that the live image
and text is displayed.
(7) Monitor a very bright
subject and check that the
live image does not dim or
darken.
(1) Check that there is no
abnormal noise.
(2) Check that the zoom
moves smoothly.
(1) Check for problems on the
LCD monitor.
(2) Check that the camera
recovers from
synchronicity disruption.
(Note) Do not apply shocks
directly to the lens or card
cover.
(2) Press the 4-way button
(left) and check that the
Macro icon (tulip) appears
on the LCD monitor.
(4) The indicator lamp lights
green -> Intermittently
lights orange or green
(recording) -> Turns off.
Measuring Measurement points
equipment and jigs (VRs, positions)