F1] : Battery Voltage Adjustment - FujiFilm FINEPIX S9100 Service Manual

FinePix S9100/S9600 Service Manual

4-16. [F1] : Battery Voltage Adjustment

<Setup for Battery Voltterge Adjustment>
(1) When adjusting the battery voltage, supply power (5.0V) to the camera from the [Power Cable Jig] before setting the jig
mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
FinePix S9100/S9600
USB
DC JACK
<Step 1>
Select [F1] Battery Voltage Adjustment on the [Adjustment Items Select] screen.
—> The [Battery Voltage Adjustment Preparation] screen appears.
PC for adjustments and checks
Digital voltmeter
USB cable
Power supply cable jig
4. Adjustments
Regurated
Power supply
4-45