FujiFilm FinePix6800Zoom Service Manual
  1. Manuals
  2. Brands
  3. FujiFilm Manuals
  4. Digital Camera
  5. FinePix6800Zoom
  6. Service manual
FujiFilm FinePix6800Zoom Service Manual

FujiFilm FinePix6800Zoom Service Manual

U/e/eg_model
Hide thumbs Also See for FinePix6800Zoom:
Table of Contents

Advertisement

Quick Links

Download this manual
WARNING
THE COMPONENTS INDENTIFIED BY THE MARK
IN THE PARTS LIST ARE CRITICAL FOR SAFETY.
PREASE REPLACE ONLY BY THE COMPORNENTS SPECIFIED ON THE SCHEMATHIC DIAGRAM
AND IN THE PARTS LIST.
IF YOU USE WITH PART NUMBER UN-SPECIFIED, IT MAY RESULT IN A FIRE AND AN
ELECTORICAL SHOCK.
FUJI PHOTO FILM CO.,LTD.
FinePix6800Zoom

DIGITAL CAMERA

SERVICE GUIDE
U/E/EG_Model
ON THE SCHEMATHIC DIAGRAM AND
Ref.No.:ZM00357-100
Printed in Japan 2001.03(M.A)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FinePix6800Zoom and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FujiFilm FinePix6800Zoom

Summary of Contents for FujiFilm FinePix6800Zoom

  • Page 1: Digital Camera

    DIGITAL CAMERA FinePix6800Zoom SERVICE GUIDE U/E/EG_Model WARNING THE COMPONENTS INDENTIFIED BY THE MARK ON THE SCHEMATHIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR SAFETY. PREASE REPLACE ONLY BY THE COMPORNENTS SPECIFIED ON THE SCHEMATHIC DIAGRAM AND IN THE PARTS LIST.
  • Page 2 FinePix6800Zoom(U/E/EG) SREVICE GUIDE SAFETY CHECK-OUT After correcting the original problem, perform the following safety check before return the product to the costomer. 6. Make leakage - current measurements to 1. Check the area of your repair for unsoldered or determine that exposed parts are acceptably poorly soldered connections.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS FinePix6800Zoom(U/E/EG) SERVICE GUIDE TABLE OF CONTENTS Page 1.Specifications 1-1.Product Specification ..........................4 2. Names of Components 2-1.Names of Extsrnal Components ......................6 2-2.Names of Internal Components ......................7 3. Disassembly 3-1.Removing R PANEL ..........................8 3-2.Removing BODY/LENS CONST ......................9 3-3.Removing ST PWB UNIT/XE PWB UNIT ....................

  • Page 4: Specifications

    1.Specifications FinePix6800Zoom(U/E/EG) SERVICE GUIDE 1. Specifications 1-1. Product Specifications System Model Digital camera FinePix6800 ZOOM Storage media SmartMedia (3.3V) File format Still image: Exif ver.2.1 (JPEG) Movie: AVI format, Motion JPEG Audio: Exif Ver. 2.1 audio file standard-compliant Image file size 2832 x 2128 pixels (6.03 million pixels)/2048 x 1536 pixels/1280 x 960 pixels/...
  • Page 5 1.Specifications FinePix6800Zoom(U/E/EG) SERVICE GUIDE Input/Output Terminals A/V Output Stereo mini- jack (1) Digital USB (1) for image data output with a PC DC Input Socket for specified AC power adapter Cradle connection socket For connection to supplied cradle Power supply and Others...

  • Page 6: Names Of Components

    2.Names of Components FinePix6800Zoom(U/E/EG) SERVICE GUIDE 2. Names of Components 2-1.Names of External Components Shutter button Flash (P.52) Self - timer lamp Strap mount Viewfinder window Microphone A/V OUT ( audio / visual out put ) socket Flash control sensor...

  • Page 7: 2-2.Names Of Internal Components

    2. Names of Components FinePix6800Zoom(U/E/EG) SERVICE GUIDE 2-2.Names of internal Components R PANEL MODE DIAL ASSY R PANEL ASSY B/W LCD F PANEL KEY PWB ASSY ST PWB UNIT MIC ASSY XE PWB UNIT BATTERY CONNECTOR PWB HOLDER SPEAKER ASSY...

  • Page 8: Disassembly

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3. Disassembly 3-1.Removing R PANEL ASSY (Remove in the order indicated by circled numbers.) [Procedure] (1)Screw x 2 (#1 M1.7 x 3.5) (2)Screw x 3 (M1.7 X 3.5) (3)Screw x 1 (#1 M1.7 x 2)

  • Page 9: 3-2.Removing Body/Lens Const

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3-2.Removing Body/LENS CONST (Remove in the order indicated by circled numbers. [Procedure] (1)Discharge (2)Body(LENS CONST/MAIN PWB ASSY/ST CONST) (3)FFC Attention in assembling It is a thing of attention to the wiring for the flash harness.

  • Page 10: 3-3.Removing St Pwb Unit/Xe Pwb Unit

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3-3.Removing ST PWB UNIT,XE PWB UNIT (Remove in the order indicated by circled numbers.) [Procedure] (2)Flash pop-up detection SW (1)FFC (4)Hook (3)XE PWB UNIT (5)ST PWB UNIT 3 -1 Attention in assembling Wire for the MIC harness under the capacitor(C819) after...

  • Page 11: 3-4.Removing Lens Const

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3-4.Removing LENS CONST (Remove in the order indicated by circled numbers.) [Procedure] (1)FFC x 2 (2)LENS CONST 3-5.Removing DC PWB ASSY (Remove in the order indicated by circled numbers.) [Procedure] (1)Harness x 2 (MIC,SPEAKER) (5)Harnes (BATTERY,LCD PANEL) (2)FFC(LCD PANEL) (6)Screw x 1 (M1.7 x 3.8Ni)

  • Page 12: 3-6.Removing Main Pwb Assy

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3-6.Removing MAIN PWB ASSY (Remove in the order indicated by circled numbers.) [Procedure] (1)Screw X 1 (M1.7 X 3.8Ni) (2)MAIN PWB ASSY 3-7.Removing BATTERY CONNECTOR,PWB HOLDER (Remove in the order indicated by circled numbers.) [Procedure] (3)Hook (1)Screw X 1 (M1.7 X 3.0)

  • Page 13: 3-8.Removing Mode Dial,B/W Lcd,Key Pwb Assy

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3-8.Removing MODE DIAL ASSY,B/W LCD,KEY PWB ASSY (Remove in the order indicated by circled numbers.) [Procedure] (1)FFC (2)Screw x 5 (M1.7 x 3.0) (3)SW FRAME (4)MODE DIAL ASSY,B/W LCD,KEY PEB ASSY SW Frame KEY PWB...

  • Page 14: 3-9.Removing Barrier Motor Head/Lens Barrier

    3. Disassembly FinePix6800Zoom(U/E/EG) SERVICE GUIDE 3-9.Removing BARRIER MOTOR HEAD/LENS BARRIER (Remove in the order indicated by circled numbers.) [Procedure] (1)Screw x 2 (M1.7 x 2.0) (2)BARRIER MOTOR HEAD Attention in assembling Note the position of the hole of the LENS BARRIER...

  • Page 15: Adjustment And Check

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE 4.Adjustment and Check 4-1.Important Point of Adjustment when Replacing Major Parts After the replacement of the MAIN PWB ASSY,DC PWB ASSY,ST CONST,ST PWB UNIT,XE PWB UNIT, LENS CONST,MODE DIAL ASSY or B/W LCD make adjustment that are marked in Table.

  • Page 16: 4-2-3.Measuring Intrument And Jig Connection Diagram

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE 4-2-3.Measuring Instrument and Jig Connection Diagram Personal Computer FinePix6800Zoom USB Terminal USB Cable DC_IN Terminal Power Cable Jig DC5V DC5V Digital Voltmeter (note1) Digital Voltmeter Reguratted power supply Reguratted power supply (note1) Li BATT Jig (note1)Please sence input voltage at DC_IN terminal in case of System block adjustment.

  • Page 17: 4-3.Adjusting By Pc

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE (2)Firmware decompression and pressrvation method. 4-3.Adjustment by PC <STEP1> D o w n l o a d c o m p r e s s e d f i r m w a r e ( Z J 0 0 4 8 4 - 4-3-1.Various downloading software de-...

  • Page 18: 4-3-2.Adjustment Software

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE 4-3-2.Adjustment software Click [Select user program] and select file "Fx6800.ff" (Fig.7) This adjustment software is operated from the user's program (Fx6800.ff) A:B/W LCD adjustment B:CCD data Input/OFD adjustment C:Mode dial adjustment D:BATT voltage adjustment...

  • Page 19: 4-3-5.Command Descriptions For[Ffw.exe]

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE (4)Etc. 4-3-5. Command descriptions for [FFW.exe] From the [Customize] dialog box, select [Etc.]. This is used for other settings. (Fig. 11) of auto-measure Change mode Do not check(=not used) Fig.13 Use Japanese font Do not check(=not used) In [Etc.], setting [Don't show OK NG] to off will allow...

  • Page 20: 4-3-6.Reading From And Writing To Eeprom

    Address designation (Moves to Address designation designated address.) Fig.19 An actual example of when page or address designation is used *Up to page F is OK for FinePix6800Zoom. on the EVR data screen can be seen in Fig. 16 .
  • Page 21 4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE To save the data on a floppy disk, select "A:3.5 inch FD" as the location for saving shown in Fig. 18. Select start to save. Once the data has been saved, the EVRdata screen is displayed.

  • Page 22: Adjustments

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE 4-3-7. Adjustments (1) Execute [Operation] -> [Start] (Fig. 18) Fig.18 (2) When [Operation] -> [Start] is executed, follow the instructions that are displayed in the instruction window (Fig. 19). Press Enter when you are done.

  • Page 23: A:b/W Lcd Adjustment

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE A: B/W LCD adjustment Press A on your PC keyboard to select A: B/W LCD adjustment from the adjustment menu. The LCD character adjustment screen will be displayed. Follow the instructions given. (Fig. 22) (Fig.22)

  • Page 24: C:mode Dial Adjustment

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE Click [OK] to write the CCD data, then conduct the OFD adjustment to complete the operation. (Fig. 26) Press Enter to return to the menu. Fig.26 C: Mode dial adjustment Press C on your PC keyboard to select C: Mode dial adjustment from the adjustment menu.

  • Page 25: E:dc Jack Voltage Adjustment

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE Follow the instructions given to complete the BATT voltage adjustment. You will return to the boot screen once the BATT voltage adjustment is completed. Follow the instructions displayed, re-open the USB port, and continue the adjustments.
  • Page 26 4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE [Aperture sensitivity adjustment] Pressing the Enter key will display a message for the Filter to be set. When preparation is complete press the Enter key. When the Enter key is pressed at the end of the Aperture sensitivity adjustment, a message for the ISO sensitivity adjustment will be displayed.
  • Page 27 4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE Press the Enter key and the WB adjustment (no filter) will progress, and the WB calculation will be carried out. (Fig. 38) Fig.38 When the WB calculation is complete and the Enter key pressed, a message will be displayed for AE adjustment.

  • Page 28: G:af Adjustment

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE G: AF adjustment Press G on your PC keyboard to select AF adjustment from the adjustment menu. An instruction screen for preparing the AF chart, light setting, and close-up lens will be displayed. (Fig. 42) Move the camera so that the AF Chart is located in the center of the LCD monitor frame, as shown in Figure 43.

  • Page 29: H:flash Adjustment

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE Pressing the Enter key will cause the 200mm adjustment to be made, at which point the AF adjustment is complete. Press the Enter key to return to the menu. (Fig. 48) Fig.48 H: Flash adjustment Press H on your PC keyboard to select Flash adjustment from the adjustment menu.

  • Page 30: J:end Setting

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE J: End Setting Press J on your PC keyboard to select End setting from the adjustment menu. Within End setting, conduct Select the destination, Choose repair position operations and the USB-ID Input, then conclude the program.

  • Page 31: 4-4.Check

    4.Adjustment and Check FinePix6800Zoom(U/E/EG) SERVIS GUIDE 4-4.Check Check the operations included in the instruction Manual. Caution about renewing packaging How to erase the opening screen Instructions on how to return the camera to its factory default condition are listed Follow the directions below for deleting the opening screen registration: 1.

  • Page 32: 4-6.Adjustment Addresses

    4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE 4-6. Adjustment Addresses Initial Adjustment Items with a " " mark in teh table indicate where an adjustment value is entered. Items without a " "mark are fixed Page Add Purpose Name Function (Contents)
  • Page 33 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_ZP10MINF Focus position (From ZP1 INF) equivalent to zoom position 10 macro photography MOD Distance 80cm 28h-31h E_ZP1NNG Focus position (From ZP1 INF) when zoom position 1 normal photography AF not functioning...
  • Page 34 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_BCNT2 PI status continuous limit value 2 at barrier open drive E_BCNT3 Overcharge time (number of polling cycles) at barrier open drive E_BCNT4 PI status continuous limit value 1 at barrier close drive...
  • Page 35 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_ZP1AFSCP_M Macro photography zoom position 1 AF search start/close margin pulses (MS4B: FAR, LS4B:NEAR) E_ZP2AFSCP_M Macro photography zoom position 2 AF search start/close margin pulses (MS4B: FAR, LS4B:NEAR)
  • Page 36 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_ERIA_AGR6 Allowable range for peak position between ZP6 AF detection areas (point, MS4bit: Minimum aperture, LS4bit: Open) E_ERIA_AGR7 Allowable range for peak position between ZP7 AF detection areas (point, MS4bit: Minimum aperture, LS4bit: Open)
  • Page 37 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_AF_GAMMA5 AF detection range 5 MS4bit CCD mode, LS4bit: Pre-gamma E_AF_GAMMA6 AF detection range 6 MS4bit CCD mode, LS4bit: Pre-gamma E_LCON_H3H Locon (horizontal 300KHz)
  • Page 38 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_OFD REC mode OFD voltage 1 (EVR ch9) E_OFD_MV 1/4, 1/2 thinning-out mode OFD voltage 1 (EVR ch9) E_OFD_8 2/8, 4/8, 8/8 thinning-out mode OFD voltage 1 (EVR ch9)
  • Page 39 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_EXTP17_VGA Equivalent VGA setup value for +0.7EV sensitivity increase E_EXTP18_VGA Equivalent VGA setup value for +0.8EV sensitivity increase E_EXTP19_VGA Equivalent VGA setup value for +0.9EV sensitivity increase E_EXTP20_VGA Equivalent VGA setup value (HI) for +1.0EV sensitivity increase...
  • Page 40 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_ZP1AV Change in aperture at zoom position 1 (offset from wide edge, AV x 100) E_ZP2AV Change in aperture at zoom position 2 (offset from wide edge, AV x 100)
  • Page 41 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_LCD_MODE1 LCD mode 1 E_LCD_MODE2 LCD mode 2 E_LCD_MODE3 LCD mode 3 E_LCD_MODE4 LCD mode 4 E_LCD_MODE5 LCD mode 5 E_LCD_MODE6 LCD mode 6...
  • Page 42 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_PREVIEW_TIME Not used (area for use with subsequent models) E_CCD_REC CCD data recording function (0: Not installed, 1: Installed) E_COMP_TYPE No compression/Compression E_MULTI_DOWN Split load selector (0: No split load, 1: Split load)
  • Page 43 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_PONV1 Simultaneous motor drive voltage (with battery power) E_PONV2 Simultaneous motor drive voltage (with AC adapter) E_MVDF2 1/2 thinning-out CCD damage compensation vertical adjustment value...
  • Page 44 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_MV_PROP3 Optimum integration value (high byte) for movies E_MV_MIN AE minimum step for movies E_MV_MAX AE maximum step for movies E_MV_F32MAX Open aperture maximum shutter speed for movies...
  • Page 45 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_AE_WGT5 Area 6 weighting coefficient E_AE_WGT6 Area 7 weighting coefficient E_AE_WGT7 Area 8 weighting coefficient E_AE_WGT8 Area 9 weighting coefficient E_AE_WGT9 Area 10 weighting coefficient...
  • Page 46 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_ABC_CGR Difference in R color difference gain value at ABC maximum compensation E_ABC_CGR Difference in B color difference compensation value at ABC maximum compensation...
  • Page 47 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_L2G_A 5: WBG <adjustment value> at fluorescent lighting auto white daylight illumination E_L2R_A 5: WBR <adjustment value> at fluorescent lighting auto white daylight illumination E_L2B_A 5: WBB <adjustment value>...
  • Page 48 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_L1MAXRG Fluorescent lamp 1 daylight color detection frame X E_L1MINBG Fluorescent lamp 1 daylight color detection frame Y1 E_L1MAXBG Fluorescent lamp 1 daylight color detection frame Y...
  • Page 49 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_IN_EXD0 Indoor-like daylight color membership coordinates 1 E_IN_EXD1 Indoor-like daylight color membership coordinates 2 E_GOFF YCPRO A-REC clear skies GR, GB pixel offset value...
  • Page 50 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_PORT_ROFF YCPRO Portrait mode R pixel offset value E_PORT_BOFF YCPRO Portrait mode B pixel offset value E_PORT_GAMMA YCPRO Portrait mode r select (MS4bit: Strobe, LS4bit: No strobe)
  • Page 51 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_LS1_ROFF YCPRO M-REC low sensitivity R pixel offset value E_LS1_BOFF YCPRO M-REC low sensitivity B pixel offset value E_LS1_GAMMA YCPRO M-REC low sensitivity Sharp 1, 2 r select (MS4bit: Strobe, LS4bit: No strobe)
  • Page 52 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_NS2_YBAL YCPRO M-REC standard sensitivity FULL size Sharp 2 edge compensation mixing ratio E_NS2_YLEV YCPRO M-REC standard sensitivity FULL size Sharp 2 edge compensation gain value...
  • Page 53 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_HS3_UYAPC YCPRO M-REC high sensitivity FULL size Sharp 3 edge compensation processing setup (bit6, 7:YAGC, bit5~0:YAPC) E_HS3_UYBAL YCPRO M-REC high sensitivity Other than FULL size Sharp 3 edge compensation mixing ratio...
  • Page 54 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_NS1L_ROFF YCPRO M-REC medium sensitivity long TV R pixel offset value E_NS1L_BOFF YCPRO M-REC medium sensitivity long TV B pixel offset value E_HS1L_GOFF YCPRO M-REC high sensitivity long TV...
  • Page 55 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_PRODUCT4 Device product name (UNICODE) E_PRODUCT5 Device product name (UNICODE) E_PRODUCT6 Device product name (UNICODE) E_PRODUCT7 Device product name (UNICODE) E_PRODUCT8 Device product name (UNICODE)
  • Page 56 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_SERIAL_NUM28 Device serial number (UNICODE) E_SERIAL_NUM29 Device serial number (UNICODE) 39h-3Eh Blank: Reserved E_STORAGE_WP Forced media write protect (0: OFF/1: ON) in storage mode...
  • Page 57 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_MAKE5 Manufacturer code E_MAKE6 Manufacturer code E_MAKE7 Manufacturer code E_MAKE8 Manufacturer code E_MAKE9 Manufacturer code E_MAKE10 Manufacturer code E_MAKE11 Manufacturer code Blank: Reserved E_DIR_NAME0...
  • Page 58 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_JIG_QUAL Image resolution for jig (0: High, 1:Fine, 2:Normal, 3:Basic) E_JIG_PULSE Feed pulses for jig E_JIG_CCD CCD drive mode for jig E_JIG_TV Shutter speed forward jig...
  • Page 59 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_SG12 For SG E_OFD_B OFD bottom voltage Basic notification data E_OFD_T OFD top voltage E_TEST_QLT QLT value for fixed length examination E_TEST_IDX_H IDX value (high) for fixed length examination...
  • Page 60 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_L3LMINRG Fluorescent lamp white low temperature detection frame X1 E_L3LMAXRG Fluorescent lamp white low temperature detection frame X2 E_L3LMINBG Fluorescent lamp white low temperature detection frame Y1...
  • Page 61 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_SOUND_VOL4 Replay volume 4 level (1.2V) E_SOUND_VOL5 Replay volume 5 level (1.3V) E_SOUND_VOL6 Replay volume 6 level (1.4V) E_SOUND_VOL7 Replay volume 7 level (1.5V): default E_SOUND_VOL8 Replay volume 8 level (1.6V)
  • Page 62 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_MOTN_YAPC Dynamic image YCPRO Edge compensation processing setup (bit6, 7:YAGC, bit5~0:YAPC) E_MOTN_YBAL Dynamic image YCPRO Edge compensation mixing ratio E_MOTN_YLEV Dynamic image YCPRO Edge compensation gain value...
  • Page 63 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_A2_UTHCMAX YCPRO Other than A-REC clear skies Other than FULL size coring maximum value E_A2_UTHCMIN YCPRO Other than A-REC clear skies Other than FULL size coring minimum value...
  • Page 64 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_NIGH_UTHNMIN YCPRO Night-time Other than FULL size brightness noise reduction minimum value E_NIGH_UTHCSLA YCPRO Night-time Other than FULL size coring gradient (0~16x, 1/16 steps)
  • Page 65 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_AE_WGTP10 Portrait mode Area 11 weighting coefficient E_AE_WGTP11 Portrait mode Area 12 weighting coefficient E_AE_WGTS0 Scenery mode Area 1 weighting coefficient E_AE_WGTS1 Scenery mode...
  • Page 66 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_LS1_THCSLA YCPRO Low sensitivity FULL size Sharp 1 coring gradient (0~16x, 1/16 steps) E_LS1_THCOFS YCPRO Low sensitivity FULL size Sharp 1 coring offset value...
  • Page 67 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_NS1_THNOFS YCPRO Standard sensitivity FULL size Sharp 1 brightness noise reduction offset value E_NS1_THNMAX YCPRO Standard sensitivity FULL size Sharp 1 brightness noise reduction maximum value...
  • Page 68 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_NS3_UTHCMAX YCPRO Standard sensitivity Other than FULL size Sharp 3 coring maximum value E_NS3_UTHCMIN YCPRO Standard sensitivity Other than FULL size Sharp 3 coring minimum value...
  • Page 69 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_HS3_UTHNMIN YCPRO High sensitivity Other than FULL size Sharp 3 brightness noise reduction minimum value E_HS3_UTHCSLA YCPRO High sensitivity Other than FULL size Sharp 3 coring gradient (0~16x, 1/16 steps)
  • Page 70 4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE Initial Adjustment Page Add Purpose Name Function (Contents) value value E_VHS3_UTHNSLA YCPRO Ultra-high sensitivity Other than FULL size Sharp 3 brightness noise reduction gradient (0~16x, 1/16 steps) E_VHS3_UTHNOFS YCPRO Ultra-high sensitivity Other than FULL size Sharp 3 brightness noise reduction offset value...

  • Page 71: 4-6-2.E/Eg_Model

    4.Adjustments and Check FinePix6800Zoom(U/E/EG) SERVICE GUIDE E/EG_MODEL Initial Adjustment Only the points which differ from the U_MODEL are noted for the E/EG_MODEL. Page Add Purpose Name Function (Contents) value value Initial Adjustment Page Add Purpose Name Function (Contents) value value...

  • Page 72: Troubleshooting

    5.Troubleshooting FinePix6800Zoom(U) SERVICE GUIDE 5.Troubleshooting The repair methods for expected troubles are shown in the following table, so please refer to it when making repairs. Content of Trouble Cause Treatment Method Half insertion connector(CN901) 1 B/W LCD is not displayed.

  • Page 73: Appendix

    6.Appendix FinePix6800Zoom(U/E/EG) SERVICE GUIDE 6. Appendix 6-1.List of Related Technical Updates Issued To ensure that after-sales srevice is performed accuratety, keep a record here of the technical updates issued that cover this device. Technical Update No. Date Title Details/Other...
  • Page 74 FUJI PHOTO FILM CO., LTD. 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan.

Table of Contents