FujiFilm FinePix F30 Service Manual page 65

FinePix F30 Service Manual
<Step 1>
Select [F5] Camera Adjustment on the [Adjustment Items Select] screen.
--> The [Camera Adjustment Preparation] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
Camera adjustment
< Camera Adjustment Preparations >
(1) Prepare the LB140 filter.
(2) Adjust the color temperature of the pattern box (PTB450)
to 6100+-50K.
(3) Adjust the luminance of the pattern box (PTB450)
to 160+-5cd/m .
2
(4) Fix the camera on a tripod and set it in front of the
pattern box.
When preparations (1)-(4) are complete,
press the [Enter] key on the PC.
--> Lens is extended when the [Enter] key is pressed.
<Note>
An error will occur during Camera adjustment, and adjustment cannot be completed, unless the pattern box is calibrated
correctly.
--> The [Shutter adjustment (without filter)] screen appears.
<Step 3>
Shutter adjustment
(1) Set the distance between the camera and pattern box.
(2) The LB140 filter is not placed in front of the lens.
When preparations are complete, press the [Enter] key.
LB140 filter
|
| 5mm or
| less.
<--Center--> | <------ Center ------>
CAMERA
--> The [Squeezing sensitivity decrease rate adjustment (with filter)] screen appears.
------------------------------
|
| 30mm or less.
|
|
------------------------------
< Setup for Camera Adjustment >
|
|
|
Pattern box |
(PTB450) |
|
|
4. Adjustments
<Fig. 4-10-1>
<Fig. 4-10-2>
65