H3C S6800 Series Configuration Manual page 43

[MCE-Vlan-interface20] ospfv3 30 area 0.0.0.0
[MCE-Vlan-interface20] quit
# On VR 2, assign IPv6 address 2002:1::2/64 to the interface connected to the MCE,
2012::2/64 to the interface connected to VPN 2, and 102.102.10.1 to Loopback 0. (Details not
shown.)
# Enable OSPFv3 process 30, and enable OSPFv3 on VLAN-interface 20 and VLAN-interface 21.
<VR2> system-view
[VR2] ospfv3 30
[MCE-ospfv3-30] router-id 102.102.10.1
[VR2-ospfv3-30] quit
[VR2] interface vlan-interface 20
[VR2-Vlan-interface20] ospfv3 30 area 0.0.0.0
[VR2-Vlan-interface20] quit
[VR2] interface vlan-interface 21
[VR2-Vlan-interface21] ospfv3 30 area 0.0.0.0
[VR2-Vlan-interface21] quit
# On the MCE, display the routing table of VPN instance vpn1.
[MCE] display ipv6 routing-table vpn-instance vpn1
Destinations : 6 Routes : 6
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2001:1::/64
NextHop : ::
Interface : Vlan10
Destination: 2001:1::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2012:1::/64
NextHop : 2001:1::2
Interface : Vlan10
Destination: FE80::/10
NextHop : ::
Interface : NULL0
Destination: FF00::/8
NextHop : ::
Interface : NULL0
# On the MCE, display the routing table of VPN instance vpn2.
[MCE] display ipv6 routing-table vpn-instance vpn2
Destinations : 6 Routes : 6
36
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0