H3C S6800 Series Configuration Manual page 3

Preface
The H3C S6800 documentation set includes 9 configuration guides, which describe the software
features for the H3C S6800 Switch Series and guide you through the software configuration procedures.
These configuration guides also provide configuration examples to help you apply software features to
different network scenarios.
The MCE Configuration Guide describes MCE fundamentals and the configuration on the switch that
acts as an MCE.
This preface includes:
Audience
•
Conventions
•
• About the H3C S6800 documentation set
Obtaining documentation
•
Technical support
•
• Documentation feedback
Audience
This documentation is intended for:
Network planners
•
Field technical support and servicing engineers
•
Network administrators working with the S6800 series
•
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention
Boldface
Italic
[ ]
{ x | y | ... }
[ x | y | ... ]
{ x | y | ... } *
Description
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are optional.
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.