H3C S6800 Series Configuration Manual page 39

Step
2. Configure an IPv6 static
route for an IPv6 VPN
instance.
3. (Optional.) Configure
the default preference
for IPv6 static routes.
Configuring OSPFv3 between an MCE and a PE
Step
1. Enter system view.
2. Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
3. Set the router ID.
4. Redistribute VPN routes.
5. (Optional.) Configure filtering
of advertised routes.
6. Return to system view.
7. Enter interface view.
8. Enable the OSPFv3 process
on the interface.
Configuring EBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance view.
4. Configure the PE as an EBGP
peer.
5. Enter BGP-VPN IPv6 unicast
address family view.
Command
ipv6 route-static vpn-instance s-vpn-instance-name
ipv6-address prefix-length { interface-type
interface-number [ next-hop-address ] |
nexthop-address [ public ] | vpn-instance
d-vpn-instance-name nexthop-address } [ permanent ]
[ preference preference-value ] [ tag tag-value ]
[ description description-text ]
ipv6 route-static default-preference
default-preference-value
Command
system-view
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
router-id router-id
import-route protocol [ process-id
| all-processes | allow-ibgp ]
[ allow-direct | cost cost |
route-policy route-policy-name |
type type ] *
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | ospfv3
process-id | static ]
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
[ instance instance-id ]
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name |
ipv6-address } as-number
as-number
address-family ipv6 [ unicast ]
32
Remarks
By default, no IPv6
static route is
configured.
The default value is
60.
Remarks
N/A
N/A
N/A
By default, no routes are
redistributed into OSPFv3.
By default, redistributed routes are
not filtered.
N/A
N/A
By default, OSPFv3 is disabled on
an interface.
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
N/A