Power Button; Mode Button; Timer Button - Carrier KC_141P Installation And Operating Instructions Manual

Remote Control
1
Power
2
Mode
7
Auto
4
High
_
3
How to Insert Batteries
Step 1 —Remove battery cover according to arrow direction.
Step 2 —Insert new batteries making sure that the (+) and (- -)
of battery are matched correctly.
Step 3 —Reattach the cover by sliding it back into position.
NOTE:
- - Use 2 LR06 AA (1.5 volt) batteries. Do not use rechargeable
batteries. Replace batteries with new ones of the same type when
the display becomes dim.
- - If the replacement is done within 1 minute, the remote control
will keep original presetting. (This function only for LCD remote
control).
How to Use
To operate the room air conditioner, aim the remote control to the
signal receptor. The remote control will operate the air conditioner
at a distance of up to 23 ft. when pointing at signal receptor of unit.
Timer
Power Saver
Mid
Fan Spee d
Low
+
Temp/Time
Fig. 29 --- Remote Control

Power BUTTON

1
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
8

Mode BUTTON

2
9
Used to select the operation mode.
5 BUTTONS
3
Used to set room temperature in Cooling
6
mode or used to set time in Timer mode.
High BUTTON
4
Used to select the
5 Mid BUTTON
Used to select the Mid
Low BUTTON
6
Used to select the Low
Auto BUTTON
7
Used to select the Auto

Timer BUTTON

8
Used to set or cancel timer operation.
9 Power Saver BUTTON
Used to select the
13
high fan speed mode.
fan speed mode.
fan speed mode.
fan speed mode.
Energy-saving mode.
Signal receptor