Removing and installing the
cowling
The cowling shown needs to be re-
moved to perform some of the mainte-
nance jobs described in this chapter.
Refer to this section each time the
cowling needs to be removed and in-
stalled.
1
ZAUE4546
1. Cowling
Cowling
To remove the cowling
Remove the screws and quick fasten-
ers, then take the cowling off.
Periodic maintenance and adjustment
EAUE4730
1
ZAUE4547
1. Screw
2. Quick fastener
TIP
The quick fasteners are removed by
pushing in the center pin and then pull-
ing the fastener out.
EAUE4741
ZAUE4548
To install the cowling
Place the cowling in the original posi-
tion, then install the quick fasteners
and screws.
TIP
The quick fasteners are installed by
pushing out the center pin, inserting
2
the fastener into the cowling, and then
pushing the center pin flush with the
fastener head.
ZAUE4549
8-7
8