Replacing A Turn Signal Light Bulb; Replacing A License Plate Light Bulb - Yamaha R15M Owner's Manual

Periodic maintenance and adjustment
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
1. Turn signal light lens
2. Screw
8
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
EAU24205
Replacing a license plate light
bulb
1. Remove the screw.
2
ZAUE4502
1. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
[ECA11192]
ZAUE4503
1. License plate light bulb socket
3. Remove the burnt-out bulb by
EAUE3370
1
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
6. Place the license plate light unit in
1
8-30
pulling it out.
the bulb) by pushing it in.
the original position, and then in-
stall the screw.
1