Yamaha R15M Owner's Manual page 36

Instrument and control functions
1
ZAUE4536
5
1. Initial r/min value
Once the initial value is set, the final
r/min value at which the shift indicator
lights are all on can be set. The mini-
mum value is 6200 r/min and the max-
imum value is 13000 r/min.
1. Final r/min value
TIP
The initial r/min value must be at least
200 r/min below the final r/min value.
x1000r/min
BRIGHTNESS
km/h
ZAUE4537
1. Brightness level display
1
The brightness level of the shift indica-
tor lights can be adjusted between 6
settings which are represented by a
segmented bar at the bottom of the
x1000r/min
display.
km/h
TIP
The shift indicator lights come on and
adjust to the brightness levels as they
are changed.
TCS
ABS
km/h
1
5-15
PEAK REV INDICATOR
The peak rev indicator marks the most
recent maximum engine r/min on the
tachometer. It can be turned ON/OFF
in this module.
UNIT
This module has 3 sub-menus and an
exit to main menu
→SPEED→FUEL
TION→TEMPERATURE→EXIT→
Long push the TRIP/INFO switch to
enter a sub-module.
SPEED
The speed measurement units can be
changed between km/h and MPH. The
selected unit type will flash.
FUEL CONSUMPTION
 If the speed measurement units
are set to km/h, the fuel consump-
tion units can be changed be-
tween km/L and L/100km. The
selected unit will flash.
 If the speed measurement units
are set to MPH, only MPG is avail-
able as a fuel consumption unit.
option:
CONSUMP-