Menu Mode - Yamaha R15M Owner's Manual

4. Press the TRIP switch to pause
the timer and return to standby
mode. Press the PASS switch to
resume the timer.
5. Press and hold (long push) the
TRIP/INFO switch to reset the tim-
er, lap number and return to
standby mode.
6. From standby mode press and
hold (long push) the TRIP/INFO
switch to return to STREET mode.
Instrument and control functions

Menu mode

1
ZAUE4529
1. Menu mode display
The menu mode contains the following
setting modules in order:
Module Description
Switch the main screen
MODE display between STREET
mode and TRACK mode
BACKLIGHT Adjust the display back-
BRIGHTNESS light brightness
Change the welcome mes-
MESSAGE
sage
SHIFT INDICA- Change shift indicator set-
TOR tings
PEAK REV IN- Change peak rev indicator
DICATOR settings
UNIT Set measurement units
Return all settings to fac-
ALL RESET
tory defaults
Exit menu mode and re-
EXIT
turns to the main display
5-12
Menu access and operation
EAUN3424
 With the main switch off, press
and hold either the TRIP or INFO
switch. Turn the main switch on
while still holding the TRIP/INFO
switch. The main display will ap-
pear and after a few seconds will
switch to the menu mode.
km/h
 Briefly press the INFO switch
(short push) to cycle forward in
the menus and adjust settings val-
ues upward (increase).
Briefly press the TRIP switch
(short push) to cycle backward in
the menus and adjust settings val-
ues downward (decrease).
 Press and hold the TRIP/INFO
switch (either side of the switch)
for 1 second (long push) to select
a menu item or confirm a setting.
 Use the EXIT option of the main
menu to return to the main display
screen.
TIP
Should vehicle motion be detected, the
menu mode will automatically exit and
return to the main display.
5