Yamaha R15M Owner's Manual page 47

With the engine turned off:
1. Make sure that the Stop/Run/Start switch is set to " ".
2. Turn the key to " " .
3. Shift transmission into the neutral position.
4. Push the Stop/Run/Start switch to "
Does the engine start?
5. Turn the engine off.
6. Shift the transmission into gear.
7. Keep the clutch lever pulled.
8. Push the Stop/Run/Start switch to "
Does the engine start?
The system is OK. The motorcycle can be ridden.
".
YES NO
".
YES NO
Instrument and control functions
WARNING
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
5-26
5