Section 1 Introduction & Intended Use; Specification Compliance; Safety Precautions; Manual Organization - Will Burt PositionIt PI-75 Operator's Manual

Section 1
Review this manual in its entirety. Contact Will-Burt UK with any questions before performing
any procedure(s) outlined in this manual. The Rackmount controller is intended to be used by
professionals. It is not intended to be used by non-professionals. The Rackmount Controller is
designed to both control and power the RX and PositionIt positioners. The Rackmount
Controller also offers the ability to integrate other controllers such as the remote joystick
controller (P/N: 5098901), panel mount controller, 3
additional control features.
The Rackmount Controller is designed to work with Will-Burt's data-controlled positioner product
lines such as:
Accupoint Positioners (Fixed Mount)
•
Bowler RX
•
Topper RX
•
Homburg RX
PositionIT Positioners (Vehicle Mount)
•
Bowler RX HD
•
PI-35
•
PI-75
•
PI-150

1.1 Specification Compliance

Refer to the Product page at www.willburt.com for the latest Declaration of Conformity.

1.2 Safety Precautions

Refer to the Safety Summary for precautions to be observed while operating or servicing this
equipment.

1.3 Manual Organization

This manual is organized into the following sections:
Section 1 Introduction
Section 2 Installation
Section 3 Operation
PM-01005-REV 2
May 2021
Introduction & Intended Use
Original Instructions
R
ACKMOUNT
rd
party controllers and/or laptops for
C
ONTROLLER
1-1