Physical Installation; Figure 2-1 Rackmount Controller Dimensions (2U - 19") - Will Burt PositionIt PI-75 Operator's Manual

R C
ACKMOUNT ONTROLLER

2.2 Physical Installation

Figure 2-1 describes the physical dimensions of the Rackmount Controller in "mm [in]".

Figure 2-1 Rackmount Controller Dimensions (2U - 19")

The Rackmount Controller is a 2U profile designed to suit a standard 482.6 (19 inch)
Rackmount. Included in the package is a hardware kit which is to be used to install the
Rackmount Controller into a Rackmount system.
A hardware pack for mounting the Rackmount controller is provided with the Rackmount
controller. Torque the provided M6 hardware to 60-65 in.-lb. when mounting the Rackmount
controller.
2-2 Original Instructions PM-01005-REV 2
May 2021