Table of Contents
Advertisement
Info Field
Coordinates: Secondary
Course
Device Odometer
Distance to Finish
Distance to Next Stop
Distance to Next Turn
Elevation: Barometer
Elevation: GPS
Elevation: Maximum
Elevation: Minimum
ETA at Finish
ETA at Next Turn
ETA at Next Stop
Finish
GPS Accuracy
Description
The coordinates for the current GPS location, cursor position, or map center in
the secondary format. The default is UTM/UPS. Change the format in Device
Setup > Units > Coordinates: Secondary.
The direction of travel on a route from the starting location to the destination
(finish or next stop). Expressed in degrees.
The total distance traveled in all trips.
The distance from the current location to the route finish.
The distance from the current location to the next stop in the route.
The distance from the current location to the next turn in the route.
The altitude (height) above or below sea level based on the barometric altimeter
reading. If the altimeter is calibrating, a red exclamation point displays.
The altitude (height) above or below sea level based on the GPS reading.
The maximum elevation achieved. Expressed in distance.
The minimum elevation achieved. Expressed in distance.
The estimated time of arrival at the route finish. Expressed as hours:minutes
AM/PM, based on the current device time.
The estimated time of arrival at the next turn in the route. Expressed as
hours:minutes AM/PM, based on the current device time.
The estimated time of arrival at the next stop in the route. Expressed as
hours:minutes AM/PM, based on the current device time.
The Finish label as it appears in the route directions.
The calculated accuracy of the GPS. The actual location is within plus or minus
the distance indicated of the location represented by the GPS. Expressed
in distance.
Info Fields Table
75
Advertisement
Table of Contents
