DeLorme Earthmate GPS PN-30 User Manual page 64

Delorme gps receiver user manual
Table of Contents

Advertisement

To turn on screen rotation
Select the Enable display rotation check box to allow
the screen to rotate when you view the device upside
down. When rotated, the arrow keypad adjusts to match
the device's orientation.
To take screenshots
Select the Screenshots On check box to take a screen
capture when you press and hold the Power button and
then press ENTER. A sound plays to confirm the screen-
shot. For more information, see Taking a Screenshot on
page 8.
To restore the default settings
To restore the default settings for all the Display options,
from any page go to MENU > Device Setup > Display >
Restore Defaults.
Connect to Computer
Use the Connect to Computer options to determine
what mode the device is in when you connect it to your
computer with the USB cable.
From any page, go to MENU > Device Setup > Connect
to Computer, and then select the option you want to
change.
 When Connected–From the drop-down list, select
the connection method the device will use when you
connect it to your computer.
The Device Setup Page
62
» Use GPS–Use this option if you are using a
compatible DeLorme mapping program or Cache
Register™ to sync your device—the program will
automatically put the device in the correct transfer
mode. This also allows you to use the device as an
external GPS; for example, with a laptop.
» Open SD Card–Allows you to view an SD card in
the device as a drive for manual file management.
» Open Internal Drive—Allows you to view the
device's internal memory as a drive for manual
file management.
 Use XMap 7 Mode–Allows you to use the PN-
Series GPS with XMap. For information about file
management with XMap, visit the DeLorme Wiki
(pn40.wiki.delorme.com/xmap).
To restore the default settings
To restore the default settings for Connect to Computer
options, from any page go to MENU > Device Setup >
Connect to Computer > Restore Defaults.
Compass and Altimeter
PN-40 only
Use the Compass & Altimeter options on the Device
Setup Page to enable/disable the electronic compass,
the barometric altimeter, and the auto calibrate altimeter

Advertisement

Table of Contents
loading

This manual is also suitable for:

Earthmate pn-40 gps

Table of Contents