DeLorme Earthmate GPS PN-30 User Manual page 50

To add a name for your route, highlight the Route
Name field, press ENTER and use the keyboard to
make changes. When you are finished editing, press
ENTER. The route name will not change when
you add points.
3. Ensure Add Point is highlighted and press ENTER.
4. Select the method for adding the point.
» Use Find–Opens the Find Page. Search for the
point you want to add; from the search result
details page, select Add.
» Use Map–Opens the Map Page. Pan the map to
the location you want to add and press ENTER. You
can add multiple points while panning. Press QUIT.
5. Repeat step 4 for each point in the route.
6. Select Navigate or View.
Note To save the route without navigating or viewing
it, press QUIT. The route is saved using the type
selected in the Calculation Method drop-down list
in the route settings.
7. Select the route method; Hike or Drive. The route
calculates and displays on the map. If you selected
Navigate, the device is in navigation mode. If you
selected View:
» To hide the route, go to MENU > Hide Route
press QUIT to return to the route details page,
and then select Hide.
The Routes Page
48
» To begin navigating, press QUIT to return to the
route details page and select Navigate.
Tip When you create a direct route from your current GPS
location to a single point and navigate to it, the route is
automatically deleted once you stop navigating.
To move, remove, or view details
for route points
As you add points to a route, you can view its details,
change its order in the route, or remove it from the route.
Highlight the point and press ENTER; then select an option.
 Details–The details page for the point displays.
» Select Mark to create a waypoint for the point; you
can edit the information. For more information see
To edit waypoint details on page 36.
» Select View to view it on the map (press QUIT
to return to the route point details page).
 Move–Enables the point in the list; use the arrow
keypad to move the point up or down in the list order,
and then press ENTER.
 Remove–Removes the point from the list. For
example, you can remove the Current Position field
if you don't want to include it in your route.