Table of Contents
Advertisement
Change password: before Administration login in, this function is not visible.
If the password needs to be changed, please login and click Change password. A window will pop out, enter the original
password. Then follow steps to enter the new password. A successful window will pop out when it's finished.
Version: the current software version will be displayed below.
When any software upgrade is required, please copy the upgrade file into the subdirectory of U disk, click "software
upgrade" to load it. Then follow instructions to upgrade it.
English: this machine supports Chinese and English. To convert it into English, a password is required.
9.1 Feeder Position Config
This interface is used to setup pick offset and test feeding for each feeder.
The left column refers to feeder No., Pick X and Pick Y refer to the coordinates of pick offset. After "click to align", this
interface will be displayed. Align the center of component (edge of tablet), then save it.
37
Zhejiang Neoden Technology Co., Ltd
Advertisement
Table of Contents
