Flow Chart Of Making A Programming File - NeoDen NeoDen9 User Manual

1.6 Flow chart of making a programming file

Note:
A. The basic procedure of making a programming file by manual programming or import coordinate file is similar, but
there are two different parts: component list and fiducial setting.
B. Please find the detailed operation steps of the differences on relative page.
Start
Edit the file
PCB feed setting
Penalized PCB first chip
Component setup
Fiducial setting
Feeder settings
Save and return
Select file and start
Zhejiang Neoden Technology Co., Ltd
See P 12
See P 14
第 14 页
See P 19
See P 19
See P 26
See P 31
10