LEGRAND NUMERIC HP i 33 40 kVA Series User Manual page 65

Note:
At the top of the enter box, it shows the max. and min. setting value of the setting item, and once the
setting value exceeds the range, the setting will be invalid.
ECO setting
Click ECO Setting, it will turn to ECO setting page, as shown in Figure 5-38. Click enter box to change the
parameter. Click Save button to save the setting. The marks of setting success and setting failure is the same
as that of system setting.
System Set Bypass Set
INV. Bypass Out Of Syn.Alarm
Bypass Max-Time Turn INV.T0 Byp. Syn. (ms)
The Max-Time Turn INV.T0 Byp.Syn.(ms)
Figure 5-37. Bypass setting 2
System Set Bypass Set
Manual Mode Set
Timing Mode Set
Regular Open Time
Timing Ending Time
Timing Cycle
MON TUE WED
Figure 5-38. ECO setting
ECO Set
Off
0
0
Back
Next Save
ECO Set
OFF
OFF
0 : 0 : 0
0 0 0
: :
THU FRI SAT SUN
Save Back
58