LEGRAND NUMERIC HP i 33 40 kVA Series User Manual page 44

Step 2 Lead the input cables, output cables and battery cables through the bottom wiring hole (the diagrams
of bottom wire hole are as shown in Figure 4-13, and connect the cables according to Figure 4-14.
respectively, then fasten the bolts.
Figure 4-13. Bottom wiring holes diagram of 40 kVA (/B) UPS
CAUTION
While wiring, ensure that the input and output wires are reliably connected with
input and output terminal, and do not reverse connect or loosely connected.
Figure 4-14. Wiring terminals diagram of 40 kVA (/B) UPS
37