Hyundai SI 268 Instruction Manual page 25

Water is dripping The lid of the pouring hole of the
from the ironing container is not closed properly.
plate
Low temperature is set
The steam shock function was
used when temperature below ooo
was set
The SELF CLEAN button was
pressed during ironing
After finishing ironing, the iron was
put into the horizontal position and
the steaming regulator is not in
Flakes and other Contrary to recommendation undi-
impurities are pee- luted water is used with excessive
hardness >15 °N
led off the ironing
plate
Brown liquid is Improper chemical agents were
pouring out of the used for removing scale
ironing plate
You use one of the types of water
that we do not recommend
Fibers from linen got into the holes
in the ironing plate and they are
burning there
The ironing plate High temperature is set
is dirty or it has
brownish colour
Laundry is not sufficiently rinsed
and it contains residues of wa-
shing powder, softener or starch
The ironing plate The plate was in contact with
surface is scratch- sharp and hard objects while
ed ironing
position
Close the pouring hole lid
Use the regulation wheel to set a
temperature, during which you can use
steaming and wait till the iron is heated
for using it
Use the regulation wheel to set a tem-
perature ••• or MAX
Do not use the SELF CLEAN function
Move the steaming regulator to
position, empty the container and put
the iron into the rest position
Use water diluted with distilled water
Clean the iron using the SELF CLEAN
function and steam shock
Do not add any chemical agents into
the water container for removing scale
Use only common clean drinking water
for filling in the container, or water
diluted with distilled water
Clean the iron using the SELF CLEAN
function and the steam shock, or va-
cuum the cooled plate delicately from
time to time
Set the program/temperature by the
control that corresponds to the ironed
material so that the material is not
burned on the ironing plate
Clean the ironing plate (see Mainte-
nance).
Rinse the laundry properly.
During ironing, avoid contact with metal
objects containing sharp edges and do
not put the iron on a metal base with
sharp edges and protrusions
25
GB