Vwr Mega Star 600R - VWR Mega Star 600 Instruction Manual

VWR Mega Star 600R

No Function
1 Status
2 Speed / RCF Value
3 Running Time
4 Temperature
5 Acceleration / Deceleration
Profiles
6 PULSE Key
7 OPEN Key
8 STOP Key
9 START Key
10 SNOWFLAKE Key
11 Arrow Keys
12 TOGGLE Key for Speed / RCF
Value
13 Program Keys
18
Display Contents
The status of the centrifuge is displayed here.
The speed (rpm) or RCF value (x g) is displayed here.
The running time is displayed here.
The temperature is displayed here.
Press the key multiple times to cycle through the available
profiles.
Press the PULSE key to immediately start the centrifugation run
and accelerate up to the maximal permissible end speed
(depending on the used rotor). Releasing the key initiates,
a stopping process at the highest braking curves.
Press the OPEN key to activate the automatic door release
(possible only when device is switched on and when the rotor is
fully stopped).
Press the STOP key to manually end the centrifugation run.
Press the START key to start a centrifugation run or to accept the
current settings.
Use the key for prewarming or precooling the centrifuge.
Use these keys in order to modify the displayed value.
Use the TOGGLE key to change the display mode.
(Speed / RCF Value).
Use the Program Keys to save and load programs.
VWR Mega Star 600 / 600R ver b, rel 17.07.2020