Mains Connection; Storage; Shipping - VWR Mega Star 600 Instruction Manual

Mains Connection

NOTICE
Plug the centrifuge into grounded electrical sockets only.
Power supply switch on the backside of the
VWR Mega Star 600
1. Turn off the power supply switch.
2. Check whether the cable complies with the safety standards of your country.
3. Make sure that the voltage and frequency correspond to the figures on the rating plate.
4. Establish the connection to the power supply with the connecting cable.

Storage

WARNING When removing the centrifuge and accessories from use if necessary clean,
disinfect or decontaminate the entire system. In doubt contact the VWR customer service.
• Before storing the centrifuge and the accessories, it must be cleaned and if necessary disinfected
and decontaminated.
Centrifuge, rotors, buckets and accessories have to be thoroughly dried before storage.
• Store the centrifuge in a clean, dust-free location.
• Be sure to place the centrifuge on its feet.
• Avoid direct sunlight.

Shipping

WARNING Before shipping the centrifuge and accessories you have to clean and if necessary,
disinfect or decontaminate the entire system. In doubt contact the VWR customer service.
Before shipping the centrifuge please bear the following in mind:
• The centrifuge must be clean and decontaminated.
• The decontamination must be confirmed in a decontamination certificate. Contact customer service
for more details.
12
Power supply switch on the right side of the
VWR Mega Star 600R
VWR Mega Star 600 / 600R ver b, rel 17.07.2020