Table of Contents
Advertisement
MOUNTING PROCEDURES
Locate the wall mounting position of the EVSE:
•
On the hardwired ACS, the three service conductors are
shielded by three feet of flexible conduit. The ACS must
be positioned such that this conduit can reach a nearby
service panel or junction box.
•
Position the bottom of the EVSE at a comfortable height
and at least 18 inches above the ground. Ensure that the
LEDs on the front panel of the EVSE can clearly be seen
by anyone who will be operating the device.
•
The ACS has four mounting holes spaced in a 2" wide
by 10" tall rectangular pattern. Use a template to mark
hole locations on the wall.
WARNING: For safety, always turn off the circuit breaker
prior to unplugging it or disconnecting the unit from the
service lines.
AVERTISSEMENT: Pour sécurité, toujours coupez le
disjoncteur avant de le débrancher ou déconnecter l'unité à
partir des lignes de services.
ADVERTENCIA: Por razones de seguridad, siempre apague
el interruptor automático de circuito antes de desenchufarlo o
desconectar la unidad de las líneas de servicio.
Page 23
ACS User Manual
Advertisement
Table of Contents
