For Solid-Wall Construction - enphase CLIPPERCREEK ACS User Manual

For Solid-Wall Construction

• To secure the unit in concrete, pre-drill appropriately
sized holes and use multi-set or wedge anchor hardware
at all four mounting points.
• To secure the unit in brick or stone, pre-drill
appropriately sized holes and use multi-set or wedge
anchor hardware at all four mounting points. Machine
screw size #10 hardware is recommended for mounting
the ACS. Screw shafts of at least 2" are recommended.
The ACS mounting holes are 3/16" in diameter, so ensure
that the screw heads do not exceed this size. Place
appropriately sized washers between the screw heads
and the ACS enclosure mounting flanges.
Page 25
ACS User Manual