Yokis Button Activation; Yokis Scenario Activation; Mute Function Activation; Mute Function Unsetting - urmet domus IPerCom VOG 7 1761 Series Instructions For Use Manual

– "End panic alarm"
– "Panic alarm off"
– "No panic"
The video door phone says the following voice message "Panic alarm off" to confirm the reception of
the voice command.
1.15

YOKIS BUTTON ACTIVATION

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands, e.g.:
– "Yokis 1, Yokis 2, etc."
– "Activate Yokis 1, Activate Yokis 2, etc."
– "Activate Yokis 1 button, Activate Yokis 2 button, etc."
There is a maximum of 8 buttons.
The video door phone says the following voice message "Activating button X", where X can vary from 1
to 8, to confirm the reception of the voice command.
1.16

YOKIS SCENARIO ACTIVATION

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands, e.g.:
– "Activate Yokis Scenario 1, Activate Yokis Scenario 2, etc"
– "Yokis scenario 1, Yokis scenario 2, etc"
– "Activating scenario 1, Activating scenario 2, etc"
There is a maximum of 4 scenarios.
The video door phone says the following voice message "Activating scenario X", where X can vary from
1 to 4, to confirm the reception of the voice command.
1.17

MUTE FUNCTION ACTIVATION

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Silent mode"
– "Disable ringing"
– "Do not disturb"
The video door phone says the following voice message "Silent mode on" to confirm the reception of
the voice command.
1.18

MUTE FUNCTION UNSETTING

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Ring mode"
– "Enable ringing"
– "Ring"
The video door phone says the following voice message "Ring mode on" to confirm the reception of the
voice command.
1.19

"NOT AT HOME" MODE

The following voice command allows changing the status of the video door phone to one of the following
modes:
At Home, Message Service (default), Remote and Diversion. Using the voice command you can, for
example, set the "Remote" status so as to receive calls on your smartphone via CallMe app when you
are not at home. It is also possible to combine the activation of a Button or a Yokis scenario, for example
turning off the lights (for more details, see paragraph
• In the video door phone area say the voice command "Hey Urmet".
DS1761-014
"Voice command parameters configuration").
19