Terminate Auto-On Mode; Send A Panic Alarm; Deactivate A Panic Alarm - urmet domus IPerCom VOG 7 1761 Series Instructions For Use Manual

2. Waiting for a response with slave video door phone (while receiving a call)
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Activate video"
– "Turn on video"
– "Show camera"
The video door phone says the following voice message "Video activated" as confirmation that the voice
command has been received and the display shows the caller image.
• The image taken at the call station is displayed on the slave video door phone.
• Finally, say one of the following voice commands:
– "Next camera"
– "Show next"
– "Next"
The video door phone says the following voice message "Next camera" to confirm the reception of the
voice command.
3. In auto-on mode
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Autoinsertion"
– "Show cameras"
– "Cameras"
The video door phone says the following voice message "Show cameras" to confirm the reception of
the voice command.
• Say the voice command "Hey Urmet" again.
• Finally, say one of the following voice commands:
– "Next camera"
– "Show next"
– "Next"
The video door phone says the following voice message "Next camera" to confirm the reception of the
voice command.
1.12

TERMINATE AUTO-ON MODE

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Close the call"
– "Close"
– "Terminate"
The video door phone says the following voice message "The call is over" to confirm the reception of
the voice command.
1.13

SEND A PANIC ALARM

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Activate panic alarm"
– "Help"
– "Set panic alarm on"
The video door phone says the following voice message "Panic alarm on" to confirm the reception of
the voice command.
1.14

DEACTIVATE A PANIC ALARM

• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
18
DS1761-014