PROAIM P-OHBP-01 Assembly Manual

Overhead Photo and Video Camera Boom Pole

(P-OHBP-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Telescopic Rod

Counterweights

Tripod Mounting

1/4" Camera Ball

and knob

adapter

head

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the P-OHBP-01 and is the answer not in the manual?

Page 1 Overhead Photo and Video Camera Boom Pole (P-OHBP-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Overhead Boom Pole Setup  Insert the tripod mounting adapter into the rod and tighten it with a locking knob.  Insert the Counterweights in 6mm threaded screw and lock the counterweights into position with the provided knob.  Mount your fluid head onto the tripod stand and tighten with the provided knob to secure it properly, as shown.
Page 3 YOUR PROAIM OVERHEAD PHOTO AND VIDEO CAMERA BOOM POLE ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.