Advertisement
2.3 USING THE PLUSNUT TOOL
2.3.1 Using a Plusnut Gun.
•
Put the Plusnut on the Plusnut gun.
•
Secure the Plusnut to the hole by turning the gun forward until the Plusnut locks.
•
Remove the gun by turning in reverse.
FORWARD
2.3.2 Using a Plusnut Tool.
•
The hardware used for the 6490 plusnut tool is not included in the fastener bag.
•
The 6490 plusnut tool can be ordered separately upon demand at no charge.
6490
STEP 1:
Assemble the 6490 Plusnut tool with the hardware needed,
Plusnut and the 9/16" wrench as shown.
For technical support, contact us at 1-800-565-5321
HARDWARE USED
Flat washer 1/4"
Flat washer 1/4" 3/4" OD
REVERSE
TOOLS
q Cordless Impact
q 7/16" Socket
q 9/16" Wrench
STEP 2:
Secure the Plusnut to the hole by turning
the bolt forward using an impact with
a 7/16" socket until the Plusnut locks.
Then remove the bolt by turning the
impact in reverse.
FORWARD
5047 Installation Guide | REV. A1 | Page 5
REVERSE
Advertisement
