Table of Contents
Advertisement
1
.
O
P
T
I
O
N
L
I
S
T
1
.
O
P
T
I
O
N
L
I
S
T
3.Temperature setting
Press the "
" or " " button to enter the temperature setting state.
Each time "
" button is pressed , temperature setting increases by 1℃；
Each time "
" button is pressed , temperature setting decreases by 1℃.
COOLING, HEATING, DRY, AUTO
:
1. Heating mode is invalid for cooling-only air conditioners.
2. The default setting range depends on the indoor unit.
3. Setting range can be changed by professional staff, and for detailed operations, please contact the
installation service/after-sales service center.
4. When the set temperature reaches the upper or lower limits, setting temperature will not increase or
decrease.
4. . Fan speed setting
When the appliance is in working mode, press the "
The fan speed will change in the following sequence:
(blinking)
AUTO
:
AUTO fan speed is invalid for "FAN" mode.
AUTO fan speed is the default setting under the DRY mode, unabling adjusting.
5. Airflow swing setting
Press and hold "
" and "
The airflow direction setting will change in the following sequence by default:
Up/Down Airflow Swing
:
This function is only applicable to the air conditioning units with the swing function.
Function set
Super mode
The maximum cooling/heating capacity can be activated at
the super mode.
How to activate:
Press and hold"
" and "
super mode, and the indoor unit will run at the ultrahigh fan speed, and displays
If you operate the Super mode under COOLING, DRY and FAN ONLY modes, the unit will
automatically go into forced cooling mode with lowest setting temperature, or go into forced
heating mode with highest setting temperature under the heating mode.
How to cancel:
Press "
"/"
"/"
" button to exit immediately.
:
For the indoor units without ultrahigh fan speed function, it will be adjusted to run at high fan speed under
the super mode, with high fan speed mode icon
Silent mode
The silent mode reduces the noise by changing the fan speed of
indoor unit so as to keep quiet during operation at night.
How to activate:
In the COOLING/HEATING mode during appliance operation, press and hold "
buttons for 5s simultaneously to activate silent mode, the indoor unit will run at the ultralow fan
speed, and displays
How to cancel:
Press "
"/"
"/"
" button to exit.
:
For the indoor units without ultralow fan speed function, it will be adjusted to run at low fan speed
under the silent mode, with low fan speed mode icon
Temperature setting range
FAN ONLY
MEDIUM
HIGH
" buttons for 5s simultaneously to adjust the airflow direction.
Left/Right Airflow Swing
UP-DOWN AND LEFT-RIGHT
" buttons for 5s simultaneously with the working unit to activate the
displayed.
icon.
displayed.
6
16℃~30℃
Unavailable for setting
" button to adjust the fan speed.
LOW
No display
None
Airflow Swing
icon.
"and " "
Hide quick links:
Advertisement
Table of Contents
