Hitachi RPIL-3.0UFE1NH Service Manual page 13

1 . O P T I O N L I S T
1 . O P T I O N L I S T
How to Insert the Batteries
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of
battery is matched correctly.
Reattach the cover by sliding it back into position.
NOTE:
Use 2 LR03 AAA (1.5volt) batteries. Do not use rechargeable
batteries. Replace batteries with new ones of the same type
when the display becomes dim.
Storage and Tips for Using the Remote Controller
The remote controller may be stored mounted on a wall with a holder.
NOTE: The remote controller holder is an optional part.
NOTE: The shape may differ from that of the remote controller holder
for the model selected.
remote controller
holder fixing
How to Use
To operate the room air conditioner, aim the remote controller to the signal receptor.
The remote controller will operate the air conditioner at a distance of up to 8m when pointing at signal
receptor of indoor unit.
CAUTION
If the batteries are not in use for a prolonged period of time, take the batteries out.
The battery can be used for about 6 months. If the remote controller is not operated even when placing it
near the receiver, replace 2 batteries with the new ones.
Please do not use manganese battery because it may cause malfunction.
Avoid extremely hot or cold locations such as placing it near or over a radiator, or in direct sunlight.
Also avoid placing under fluorescent light.
Do not let children play with the remote controller.
To avoid interference, the indoor unit and the remote controller unit should be at least 1m away from a TV
set or a radio. In case more than two air conditioners are installed in the same room, it may interrupt
individual operation.
Operation modes
Selecting mode
Press Press button repetitively.
The operation modes are changed in sequence:
Result:
PRESS
Heating mode is NOT available for cooling only air conditioner.
remote controller
mounting
COOL DRY HEAT
11
FAN